Hydrogen Hot Rod Nano Bubble Hydrogen Fuel Cell. 

New the 3d STL Auto Cad files for the Hydrogen Hot Rod Stanley Meyer 11 Cell   done BUILD BABY BUILD stl cnc files spread it share it 
  
https://drive.google.com/file/d/0B5BuQjYkKv8RTS1iOUs5ZEI2eG0zNW43UUJhS3lzRV8zeUxV/view?usp=sharing

 

Stanley A Meyer 11 Cell Voltrolysis Unit
Page as a Pdf.png
HHO hydrogen Cell Voltrolysis tube wet
Stanley A Meyer 11 Cell Electrolyser

Electrolyzer 11 Cell Stanley Meyer

 

When treating the SM type cell with high voltage after the voltage drop the cell will not return to 0V.

It will hold the charge for a latency time until it drops to zero. Such as a Water Capacitor.

 

One more thing I just noticed, and would like confirmation on, that after watching the '93 lecture Stanley explains, that when you reach full voltage potential, maximum voltage amplitude, you switch off "5 seconds" and then by switching on again you create resonant action...

 

because when you switch off you can produce gas for 94 seconds while the voltage potential drop and therefore when you switch on again after that "5 seconds" the gas process starts off at a higher rate causing more gas production and therefore entering a resonant gas production rate and by repeating this on/off process you reach maximum applied voltage through now n step charged effect to maximum applied voltage or until the full flow rate of water into the now resonant cavity is achieved....

 

After watching the '93 lecture Stanley explain, through the Grace of God and how I under stood it, that when you reach full voltage potential, maximum voltage amplitude, you switch off "5 seconds" and then by switching on again you create resonant action... because when you switch off you can produce gas for 94 seconds while the voltage potential drop

 

and therefore when you switch on again after that "5 seconds" the gas process starts off at a higher rate causing more gas production and therefore entering a resonant gas production rate and by repeating this on/off process you reach maximum applied voltage through now n step charged effect to maximum applied voltage or until the full flow rate of water into the now resonant cavity is achieved....

 

Once ionization threshold is reached some kind of avalanche process starts. Ionization means current flow and voltage adjustment takes care for maximizing production while suppressing tendency for arcing.

 

in saying then is it obvious to have 1 high voltage transformer, and power supply pulse at 5 to 10 second intervals. with its own variable time for high voltage polarization,and vary its magnitude, up to 11 kv such as a coil in the water near the plates.and a separate control , and power source at the plates in resonance.

 

less voltages, between the plates 24 to 36 volt., low amp setting miliamps, at. 20 thousand to 40 thousand hz or is that mhz. . separate power supply, and control for self adjusting resonance of the circuit.. this is what i got out of one such patent that uses a coil as a bias. the gaps at the cells need be in spec. for tubular, and all cells 2 to 4 mm is max gap between plates.:angel

Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit
HHo Cell Hydrogen Voltrolysis
Stanley A Meyer 11 Cell Voltrolysis
HHo oh2 Hydrogen wet Cell Voltrolysis

To be exact: that's not true, you guys use 6 tubes in the WFC and use different type of VIC configuration for a setup...

That is not exactly correct, I am using my 10+1 WFC's as Stan had it....and yes all we have to go on is the photos from the estate.

 

That is all I have ever used building the VIC cards and WFC and coil packs.....but yes I do have both coil packs and  6 set WFC.

 


As long as they are all wired up as Stan had them...you cant go wrong.
 chokes  might be diff size on the 6 cell but that's really it.

Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit
HHo Hydrogen Cell Voltrolysis
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis
Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit

It is Possible to make a Ohmasa like effect to beetter dissolve Nano bubbles with a pond fogger like this in the cell also can be used to release nano bubbles

Stanley A Meyers Stan hho wfc cell pond

paulb=Paul Butcher 

Now Paul asked me to explain the experimental development stages that Stanley Meyer went through. 

We see in stage I that Stan used 18 inch long stainless steel tubes with a modified heavy duty alternator. 
And was able to idle the 1600 cc Volkswagen engine in the driveway. 

Note: without water injection spark plugs, 660 nm LEDs gas processor on the intake and the recycled exhausts. 

I believe Max Miller was able to achieve 300 V with his alternator demonstration on the 18 inch long stainless steel tube set. 

Now in the 3rd stage, Stan abandoned the EPG. 

And went back to elector-mechanical ROTOR PHASER. 
Producing 3 pulse phases with 10 output channels . 
With probably as many as 10 water fuel capacitors per output channel. 
That would be 100 water fuel capacitors in all. 

In stage IV the International Patent. 
Stan went shorter stainless steel tubes and higher voltages. 
Approximately 120 volts per inch on the T304 stainless steel. 

4 inches=2020 volts 
5 inches=1900 volts 
6 inches=1780 volts 
7 inches=1660 volts 
8 inches=1440 volts 
9 inches=1320 volts 
10inches=1200 volts 
11inches=1080 volts 
12 inches= 960 volts 
13 inches= 840 volts 
14 inches= 720 volts 
15 inches= 660 volts 
16 inches= 540 volts 
17 inches= 420 volts 
18 inches= 300 volts 

2.75 inches is the length T304 stainless steel that is used in the international patent. 

120 volts per inch 1 on theT304 stainless steel. 

Stanley Meyer 11 Cell AutoCad Autodesk D
HHO H2 Hydrogen Cell voltrolysis

Transducer for Monitoring Water Cell Pressure

Omega Precise Measurement Quality transducer Reads PRESSURE AND DETERMINED BY PRESSURE, ADAPTS induction RESISTANCE, AND OSCILLATIONS INPUT PULSE SO WE HAVE A CONSTANT gas production

Stanley A Meyer 11 Cell Voltrolysis Unit
Water is Fuel

Water is Fuel

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

Stanley Meyer Water Fuel Cell.jpg

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

Stanley Meyer Water Transducer

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

Stanley Meyer Water Fuel Cell.jpg

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

Stanley Meyer Water Fuel Cell.jpg

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

Stanley Meyer Water Pressure

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

Stanley Meyer Water Pressure

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

Stanley Meyer Water Pressure

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

Stanley Meyer Water Pressure

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

Stanley Meyer Water Transducer

PX176-015A5V

•±1% Interchangeability

•Sealed for Harsh Environments

•1 to 6 Vdc Output

•9 to 20 Vdc Power

•-55 to 105°C Operating Range

•Fully Calibrated and Temperature Compensated

 

SPECIFICATIONSExcitation: 9 to 20 Vdc at 15 mA (polarity protection)

Output: 1 to 6 Vdc

Input Resistance: 2 MΩ at 25 Vdc

PERFORMANCEAccuracy: ±1.0% full scale

Linearity: ±0.5% full scale

Hysteresis: ±0.25% full scale

Zero Balance: ±1% full scaleSpan

Tolerance: 5 ±0.1 Vdc

Operating Temperature Range: -55 to 105°C (-67 to 221°F)

Compensated Temperature Range: 0 to 85°C (32 to 185°F)

Thermal Zero Effect: ±0.02% rdg/°C (±0.01% rdg/°F)

Thermal Sensitivity Effect: ±0.02% rdg/°C (±0.01% rdg/°F)

Proof Pressure: 2x full scale; 1.5x over 200 psi

Burst Pressure: 20x full scale; 10x: 50 to 200 psi; 5x: 500 psi and up

CONSTRUCTIONGages: Piezoresistive on bending beam

Body/Diaphragm Material: 300 Series SS (silver, copper, nickel, cadmium brazed)

Pressure Port: 1/8-27 NPTELECTRICAL CONNECTIONCable Style: 900 mm (36") 3-lead shielded PVC

Pressure Cavity Volume: 0.091 in³Weight: 113 g (4 oz)Frequency Response: 50 Hz

 

http://www.omega.com/pptst/PX176.html

 

 

 

HHO Hydrogen Cell Voltrolysis
HHO Hydrogen Cell Voltrolysis
HHO Hydrogen Cell Voltrolysis
HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

HHO Hydrogen Cell Voltrolysis

First Draft 

https://onedrive.live.com/redir?resid=A5F9DB5B451D72AC%213260

 

WFC 11 BY Chris & RWGresearch.

(may not be complete)

 

SKL 

 

CathodeVersion 2013-05-12

Metric version

304 S/S material

Anode 2013-05-12.zip - 31.13 kB

 

AnodeVersion 2013-05-12

Metric version

304 S/S material

Cathode 2013-05-12.zip - 59.08 kB,

 

Going metric is Ok for me, but all the holes from Russes/Chris drawing is for imperial type threads. Can the CNC tap both types?

 

As for the material requirements it seems so far that it is:7.5" roundstock Delrin/Acetal6.5" Outside x 5.5" (5.48"?) Inner Delrin/Acteal Tube (Do they sell it in tubes?)

Cell Electrodes

Anode and Cathode 

 

Stanley A Meyer 11 Cell Voltrolysis Unit
Stanley A Meyer 11 Cell Voltrolysis Unit

Outside should be the cathode to make hydrogen there 

.

outer as cathode makes more gas , as a higher surface area as a capacitor
water may not hold the majority of capcitence and can be reduced to a minium between tubes.


confirmed by electro you tube running alternator system same result

the double layer interface of water and the cathode where charging the water occurs i.e. not throughout the bulk of the water. If that is the case it might be worthwhile having a high surface area cathode in